Original Finish

$12.00$581.00

The Original Finish is the most versatile finish. It can be used on just about any woodwork, applied by brush, rag, lambswool pad, roller, or sprayer. It is thin enough for quick penetration with enough solids for a rich water-resistant coat. The look of the final finish is matte with only two coats. Subsequent coats, buffing and top coating with Liquid Wax End Sealer will produce more sheen and increase the water-resistance.

CoverageApprox. 350 square feet per gallon or 500 board feet per gallon; rough-sawn materials tend to absorb more. You get less coverage on the first coat and more on the second. The density of the wood is also a factor. Softer woods like pine or reclaimed Doug-fir will absorb more than oak for example. And obviously dry wood will soak up a lot more oil than green timbers. You may want to over-estimate when ordering.

Clean UpFor spills, over spray, or to clean up brushes, use our Pure Citrus Solvent or other solvent (Turpentine, Mineral Spirits, etc.).

Clear

The Heritage Natural Finish Product Line is favoured by timber framers and traditional wood finishing purists. Made of plant based oils and beeswax, this finish will enhance the beauty of wood, is easy to work with, and results in a finish that can be maintained and spot repaired without ever requiring sanding off or total refinishing. Made with Pure Tung Oil, Special Aged Linseed Oil, Beeswax, Pine Rosin, and Pure Citrus Oil and nothing else. Low wax content allows Heritage Natural Finishes to be used inside and outside.

Size

Sample Size, Quart, 1 Gallon, 3 Gallon, 5 Gallon

Scroll to Top